70D-Link M15 User Manual
Section 3 - Conguration
Schedule
Go to Management > Time & Schedule, then click the Schedule tab. The
Schedule page allows you to control some of the functions based on a
pre-congured schedule, for example, Port Forwarding in Features > Port
Forwarding and Firewall Settings in Features > Firewall as well as sending
Syslog via email in Management > System Log.
To congure the Time settings, click the Time tab. Refer to Time on page
69.
If you wish to remove a schedule, click
in the Delete column. If you wish
to edit a schedule, click
in the Edit column. If you wish to create a new
schedule, click the Add a Schedule button.
On the Schedule creation page, enter the name of your schedule in the Name
eld.
Each box represents half an hour, with the clock time (0~23) at the top of each
column. To add a time period to the schedule, simply click on the start time
and drag to the end time. You can add multiple days and multiple periods per
day to the schedule.
To remove a time period from the schedule, click on the cross icon.
Click Apply to save and close the page. Then click Save when you are done
creating schedules.
To Next Page
Loading...
Need help?
General
