EasyManuals Logo

D-Link M15 User Manual

D-Link M15
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
49D-Link M15 User Manual
Section 3 - Conguration
Network
This section will allow you to change the local network settings of the M15
and congure the DHCP settings. Go to Settings > Network to access this
conguration page. Click Advanced Settings... to expand the conguration
items.
Network Settings
LAN IP Address Enter the IP address of the device. The default IP address is
192.168.0.1. If you change the IP address, once you click Save, you
will need to enter the new IP address in your browser to get back into
the conguration utility.
Subnet Mask Enter the subnet mask of the device. The default subnet mask is
255.255.255.0.
Management
Link
The default address to access the devices conguration is
http://M15-xxxx.local/ (where xxxx represents the last 4 digits of
your device's MAC address). You can replace M15-xxxx with a name
of your choice.
Local Domain
Name
Enter the domain name (optional).
Enable DNS
Relay
Disable this option to transfer the DNS server information from your
ISP to your computers. If enabled, your computers will use the device's
settings for DNS service (refer to Primary and Secondary DNS Server
settings for each Internet connection type).

Other manuals for D-Link M15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link M15 and is the answer not in the manual?

D-Link M15 Specifications

General IconGeneral
SecurityWPA3
MU-MIMOYes
BeamformingYes
Product TypeMesh Wi-Fi System
ModelM15
Parental ControlsYes
Guest NetworkYes
Mobile AppD-Link Wi-Fi App
Voice ControlAmazon Alexa, Google Assistant
Frequency BandsDual-band
Wi-Fi SpeedAX1500
Security ProtocolsWPA3, WPA2, WPA
Maximum Data Rate1500 Mbps
Ethernet Ports (Per Unit)1 x Gigabit WAN port, 2 x Gigabit LAN ports

Related product manuals