D-Link Nuclias Connect DAP-2622

DAP-2622 Quick Installation Guide
1
ENGLISH
Hardware Overview
LED Indicators
1
PoE
PoE
Figure 1: Front Panel LED
# LED Description
1
Power/
Status
Green (Solid) - Device
operational
Red (Flashing) - Device
booting up/Device
malfunctioned
Red (Solid) - Device boot up
has failed
Table 1: LED Description
Before You Begin
This installation guide provides instructions
for installing the DAP-2622 on your network.
Additional documentation is also available on
the D-Link support website.
• Nuclias Connect Manual: For additional
information and instructions on how
to configure the device using Nuclias
Connect.
• DAP-2622 User Manual: For additional
information and instructions on how to
configure the device using the web user
interface.
Package Contents
This DAP-2622 package includes the following
items:
• DAP-2622 Access Point
• Mounting Plate and Hardware
• Quick Start Guide
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note: No power adapter is supplied with this
product. To power the unit, use an 802.3at PoE
Switch.
System Requirements
• Computers with Windows®, Macintosh®,
or Linux-based operating systems with an
installed Ethernet Adapter
• Internet Explorer 11, Safari 7, Firefox 28,
or Google Chrome 33 and above (for
configuration)