12D-Link WDA-1320 User Manual
Section 2 - Installation
Note: Please install the WDA-1320 Desktop Adapter into your computer before installing the driver software from the D-Link CD.
Refer to the insert included with this adapter for installation instructions.
Turn on the computer and Insert the D-Link WDA-1320 Driver CD in the CD-ROM drive. The step-by-step instructions that follow
are shown in Windows XP. The steps and screens are similar for the other Windows operating systems.
If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\Drivers\setup.
exe” (where D: represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click Install Drivers.
Adapter Installation
To Next Page
Loading...
