D-Link WDA-1320 - Windows Vista Users

71D-Link WDA-1320 User Manual
Appendix B - Networking Basics
Windows Vista
™
Users
• Click on Start > Control Panel. Make sure you are in Classic View. Double-click on the Network and Sharing Center icon. Along the left panel in
the window, click on Manage network connections.
• Right-click on the
Local Area Connection which represents your D-Link wireless network adapter which will be connected to your network.
• Highlight
Internet Protocol Version 4 (TCP /IPv4) and click Properties.
• Click
Use the following IP address and enter an IP address that is on the same
subnet as your network or LAN IP address on your router or network.
Example: If the router’s LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the number
you choose is not in use on the network.
• Set
Default Gateway the same as the LAN IP address of your router or gateway.
• Set
Primary DNS the same as the LAN IP address of your router or gateway.
• The
Secondary DNS is optional (you may enter a DNS server from your ISP).
• Click
OK to save your settings.