EasyManua.ls Logo

Da-Lite TENSIONED DUAL MASKING ELECTROL - User Manual

Da-Lite TENSIONED DUAL MASKING ELECTROL
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
Instruction Book for
TENSIONED DUAL MASKING ELECTROL®
The Da-Lite Difference.

Questions and Answers

  • C
    Cory ThomasAug 19, 2025
    Why is my Da-Lite TENSIONED DUAL MASKING ELECTROL Projection Screen making noise?
    • E
      elizabethallenAug 20, 2025
      If your Da-Lite Projection Screen is making excessive noise, it could be due to gear noise. The suggested solution is to replace the motor assembly.
  • A
    Andrew PriceAug 30, 2025
    What to do if my Da-Lite TENSIONED DUAL MASKING ELECTROL Projection Screen is coasting?
    • H
      Holly GomezAug 30, 2025
      If your Da-Lite Projection Screen is coasting, it may be due to a defective brake. The suggested solution is to replace the motor assembly.
  • T
    timothywoodNov 9, 2025
    What to do if my Da-Lite Projection Screen won't operate and the motor doesn't hum?
    • T
      tylerstephensNov 9, 2025
      If your Da-Lite Projection Screen isn't working and the motor is silent, several issues could be the cause: * **Incorrect line voltage:** Ensure the voltage is between 115-125V (or 220-240V). Rewire the incoming electric line if the voltage is insufficient. * **Blown fuse:** Replace the fuse. * **Tripped circuit breaker:** Reset the circuit breaker. * **No power to switch/junction:** Check for power at the junction box. Tighten loose wire connections and correct improper connections. In the 'down' position, check for power across black and white leads. In the 'up' position, check for power across red and white leads. * **Thermal overload tripped:** Allow the motor to cool down for 15 minutes, then try again. * **Broken wire:** Check for continuity. Cut off the old splice and r...

Summary

Important Safety Instructions

Pre-Installation

Installation

Screen Adjustment for 120 V Screens

More Screen Drop

Procedure to increase the screen's downward travel for picture surface positioning.

Less Screen Drop

Procedure to decrease the screen's downward travel for picture surface positioning.

Screen Adjustment for 220;240 V Screens

More Screen Drop

Procedure to increase the screen's downward travel for picture surface positioning.

Less Screen Drop

Procedure to decrease the screen's downward travel for picture surface positioning.

Suggested Methods of Installation

Method A

Offset mounting, recessed above ceiling, for plaster, drywall, tile, or paneling.

Method B

Offset mounting, recessed above ceiling, adapted for 3/4" ceiling, cut to 1/4" thick.

Method C

Offset mounting, recessed above ceiling, adapted for 1/4" paneling for ceiling.

Method D

Flush mounting, recessed above ceiling, for dropped or acoustical ceilings.

Troubleshooting

Limited One Year Warranty

Da-Lite TENSIONED DUAL MASKING ELECTROL Specifications

General IconGeneral
BrandDa-Lite
ModelTENSIONED DUAL MASKING ELECTROL
CategoryProjection Screen
LanguageEnglish

Related product manuals