To Next PageTo Next PageHow to fix a Da-Lite Projection Screen when the fabric hangs crooked?
If the fabric on your Da-Lite Projection Screen hangs crooked, consider these solutions: * Check the installation: Ensure the screen is level and plumb. * Adjust the down limit switch: Slowly adjust the "down" limit switch until the roller is exposed and the wrinkle comes out, then readjust for proper drop. * Fabric damage: If the fabric is damaged, replace it.
What to do if Da-Lite TENSIONED LARGE ADVANTAGE ELECTROL Projection Screen won't operate but there is power at the junction box?
If your Da-Lite Projection Screen isn't working despite power at the junction box, the following might be the cause: * Thermal overload: Let the motor cool down for 15 minutes and try again. * Broken wire: Check for continuity and reconnect any broken wires. * Defective components: The motor, limit switch, or capacitor might be defective. Replace the motor assembly. Note that the motor is a sealed assembly.
General| Brand | Da-Lite |
|---|---|
| Model | TENSIONED LARGE ADVANTAGE ELECTROL |
| Category | Projection Screen |
| Language | English |
