Need help?Do you have a question about the DAB E.SWIM and is the answer not in the manual?
General| Brand | DAB |
|---|---|
| Model | E.SWIM |
| Category | Swimming Pool Pump |
| Language | English |
General safety precautions before installation and operation.
Emphasizes professional installation and maintenance for safety.
Guidelines for safe use by authorized and trained individuals.
Critical safety rule: never run the pump without water.
Safety requirements for electrical connections and system compliance.
Hazards associated with elevated temperatures during operation.
Specifies acceptable liquids and warnings against incompatible fluids.
Hazards related to pool environments, including entrapment.
Detailed risks of suction entrapment and associated consequences.
Warning about pressurized air and safe handling of the cover.
Detailed explanation of the pump and its electronic inverter system.
Specifications and technical data for the E-SWIM pump.
Recommendations for connecting pipes and ensuring proper water flow.
Guidelines for safe and compliant electrical hookup.
Details on connecting external signals and control interfaces.
Description of the control panel's keys, LEDs, and display elements.
Explanation of the information shown on the main operating screen.
Procedure to fill the pump with water and prepare it for operation.
Step-by-step initial setup process for essential parameters.
Explanation of regulating modes like Flow Control and Fixed Curve.
Describes Manual and Auto modes for pump operation.
How to start and stop the pump using manual controls.
Methods to adjust setpoints and parameters on the fly.
Using Timers or external signals for automatic pump control.
How to enter and move through the system menu.
A detailed tree structure of all menu options and their numbering.
Accessing system settings like WIZARD, Languages, Day & Time, Units.
Configuring specific flow or speed setpoints and durations for keys S1-S4.
Configuring setpoints S5-S8, which are controlled by the Timers system.
Setting parameters for a rapid system wash or recirculation function.
Setting up weekly schedules for automatic pump operation.
Configuring the pump for control via external units or PC.
Enabling/disabling and configuring the pump priming procedure.
Setting up the automatic pump rotation to prevent freezing.
Configuring the function to prevent mechanical blocks during inactivity.
Viewing and clearing the record of past operational faults.
How to manually clear active faults using the 'Reset' key.
Explains faults that can be automatically reset by the system.
Procedure to reset all parameters to their default values.
Common causes and checks for when the pump fails to start.
Reasons for the pump failing to draw water and potential solutions.
Troubleshooting steps for when the motor fails to operate.
To Next Page