8-1. Types of Setting mode & Set-up
For Setting mode, there are 3 different types of mode such as Function mode, Digital
calibration mode and Actual load calibration mode.
Mesuring mode
While key is being
Press, press
key
Function mode
Digital calibration
mode
Actual load
calibration mode
① Function mode
Acess to each function setup mode. Please refer 8-2 function mode.
② Digital calibration mode
It is to calibrate into the sensor’
s output value. No need to prepare for the actual
load (stand weight). Please refer 8-4 how to calibrate.
③ Actual load calibration mode
It is to calibrate by adding the actual load (standard weight or the load you know).
Please refer 8-5 how to calibrate.
* Measurement mode status is the status of the indicator showing the current
value.
※ DN-30W can only set Function mode.
Change to key
Select by
key
To Next Page
Loading...
Need help?
General
