10
Install
Stand
※ This page is only for DLT-19L1T/L2T and DLT-22L1T/L2T.
1. Insert Frame Stand Cover into the Cover Stand Base and insert Frame Stand into Cover Stand Base - insert two
screws (Ø4 x 14mm ) in the hole at the bottom of the stand and tighten.
2. Place the TV faced down on a soft cloth or cushion on a table and insert the assemble stand into the metal at the
bottom of the TV.
3. Insert two screws (Ø4 x 14 mm) into the holes indicated and tighten.
To Next Page
Loading...
