11
PR/PAGE
SELECT
OK
PR/PAGE
SUBCODE
Parts of the Remote
Control
1.
MUTE
: Press this button, and the sound goes off.
Press again, and the sound returns.
2.
POWER
: TV on/off button in STANDBY mode.
3.
DVB/Analogue
: Each time you press this button, the TV will toggle
between DVB & RF Analogue. Also you can come back to the cur-
rent TV mode from any External mode.
4.
AV
: Each time you press this button, the TV will cycle through:
TV AV1 AV2 Component HDMI PC TV
5.
SLEEP
: Sleep Timer setting.
SLEEP TIMER : OFF 15 30 45 60 75 90 105 120
OFF
6.
NUMBER
: Using the numbers buttons on this board, you can se-
lect programmes directly.
7.
S.EFFECT
: Using this button, you can listen to the virtual sur-
round sound. The sound will cycle through:
Off SPATIAL 3D Panorama Off
8.
MTS
: You can select sound modes in Mono, Stereo, Dual1,
Dual2, NICAM STEREO. This works only in analogue TV mode.
9.
VOL
: Adjusts the volume.
10.
PR/PAGE
: Changes the programme on your TV.
11. / : Moves the cursor up/down in the menu.
12. / : Accesses and adjusts items in the menu.
13.
OK/SELECT
: Auto Tuning Start and Manual Tuning Store.
14.
GUIDE
(digital mode only): Moves to EGP in DVB mode direct-
ly. See page 35.
15.
SUBTITLE
(digital mode only): Selects the Subtitle On/Off in the DVB
MENU directly, or shows the subtitle if it has on in the DVB MENU.
See page 32.
To Next Page
Loading...
