15
Preparation
Inserting Batteries into the Remote Control Unit
To load the batteries, turn the remote control handset over and open the battery compartment.
Insert the batteries (Two 1.5V, type R03 or AAA).
Make sure that the polarity matches with the (+) and (-) marks inside of the
battery compartment.
Note:
To avoid damage from possible battery leakage, remove the batter-
ies if you do not plan to use the remote control handset for an ex-
tended period of time.
Mains Connection
1. Plug the end of AC cord into a Power outlet with 220V-240V~,50Hz.
AC Cord
Power outlet
batteries
To Next Page
Loading...
