Daewoo DRV-6815 User Manual

22
Clock Setting
1 Follow steps 1-2 as shown under ‘Manual Set’.
2 Use […†] to select ‘Clock Setting‘.
3 Press [ENTER]. The ‘Clock Setting’ menu
appears.
4 Enter the date and time.
œ√(left/right): Moves the cursor to the previous
or next column.
…†(up/down): Changes the setting at the
current cursor position.
5 Press [ENTER] to confirm your setting, then press
[SETUP] to exit the Setup menu.
Installation
Confirm Back Exit
ENTER MENU SETUP
†
†
†
Manual Set
Auto Set
Clock Setting
Adjust Channels
Installation > Clock Setting
Confirm Back Exit
ENTER MENU SETUP
Please set the clock.
Date :
01 / 12 / 2006
TIme :
04 : 11 : 33
†
†
Setup menu
Adjust Channels
1 Follow steps 1-2 as shown under ‘Manual Set’.
2 Use […†] to select ‘Adjust Channels’.
3 Press [ENTER]. The Adjust Channels menu
appears.
4 Use […†] to select the PR number you want to
adjust. Then press [ENTER].
Move Up/Down
After tuning TV stations into your DVD Recorder +
VCR, you may wish to change the order of PR's you
have in your set, as your preference.
1 Use […†] to select 'Move Up' (or ‘Move Down’)
and press [ENTER].
2 The selected PR will be moved up or moved
down.
Edit
After tuning TV stations into your DVD Recorder +
VCR, you may wish to put a name (4 digits) into any
channel you want to.
1 Use […†] to select 'Edit' and press [ENTER].
2 Keyboard screen will appear. To enter characters,
see page 31~32.
Delete
After tuning TV stations into your DVD Recorder +
VCR, you may wish to delete a station.
1 Use […†] to select 'Delete' and press [ENTER].
Installation
Confirm Back Exit
ENTER MENU SETUP
†
†
†
Manual Set
Auto Set
Clock Setting
Adjust Channels
Installation > Adjust Channels
Confirm Back Exit
ENTER MENU SETUP
No Name
PR-1 BBC1
PR-2 - - - -
PR-3 - - - -
PR-4 - - - -
PR-5 - - - -
PR-6 - - - -
Move Up
Move Down
Edit
Delete
DF-H7DD3D-FB-I(GB) 2007.7.25 2:53 PM ˘ ` 22 mac001 1200DPI 100LPI

Daewoo DRV-6815 Specifications

Operating Environment

operating temperature	5°C to 35°C
operating humidity	5% to 90%

Power

power requirements	200–240V~, 50/60 Hz
power consumption (operation)	Maximum 26W
power consumption (standby)	5W

Recording

recordable time (DVD)	1 hour (HQ mode), 2 hours (SP mode), 4 hours (EP mode), 8 hours (SEP mode)
recordable time (VCR)	SP: 3 Hours (E-180), LP : 6 Hours (E-180)
video recording format compression	MPEG 2

VCR Specifications

tape speed SP	23.39 mm/sec
tape width	12.7 mm
rewind time	less than 150 sec (E-180)

DVD Specifications

laser wavelength	650 nm
frequency response (DVD)	8 Hz to 22 kHz
resolution	Over 500 lines (HQ Recording)

Inputs

antenna input	75 Ω
video input	1.0 Vp-p 75 Ω, sync negative, RCA jack x 2
audio input	-8.8 dBm more than 47 k, RCA jack (L, R) x 2

Outputs

video output (composite)	1.0 Vp-p, unbalanced
component video output (progressive scan)	(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
audio output (digital)	0.5 V (p-p), 75 Ω, RCA jack x 1

Weight and Dimensions

dimensions	430 92 312 (w h d)
mass	4.96 kg