Daewoo DTD 5500 - Keypad Functionality and Call Operations; Key Operations; Status Indicators; Making and Answering Calls

29
PHONEBOOK
This key is used to enter the phonebook both in standby mode and in talk mode;
Exiting from a function during menu operation;
DEL
The key is used to delete memory.
In edit memory or per-dialing have a mistake by this key to correct;
▲/CID
Scrolling up through lists and menu options;
Increasing the earpiece/Speakerphone volume during a call;
Review the incoming phone numbers.
▼/OUT
Scrolling down through lists and menu options;
Decreasing the earpiece/Speakerphone volume during a call;
Review the outgoing phone numbers.
INT
To set up an internal call to handset;
To transfer an incoming call to handset;
To set up a conference call with an external line and an internal handset.
FLASH
Flash key to reset the line without leaving the handset
RD/P
In talk mode once pressing to redial the last dialed number;
Press while dialing a number to insert a pause.
Press this key to speakerphone mode
M1- M7
One-touch memory
NEW
When there is missing call ,the new LED will flickering
IN USE
During conversation, the LED is lighten
When a call is incoming, the LED will flash
Making and Answering Calls
To make a call
Pick up the handset and the icon will appear (or press key, icon will appear). Also the display
will show “LINE IN USE”. Use the keypad to enter the number you wish to dial.
When you have finished the call place the handset back on the base (or press key again).
To make a call by using the pre-dialing function:
Dial the required telephone number first, and you can use the
DEL
key to delete digits if you make a mistake,
then add the right ones. Pick up the handset or press the key. The number will be dialed out automatically
using the handset or speakerphone mode selected.
﹡
To insert a pause in the dialing sequence, press the
RD/P
key, which will then show a “
P
” in the number.
To answer a call
When a call is incoming, the IN USE LED is blinking to indicate, pick up the handset or press key to
answer the call.
* When there are missed calls, the NEW LED is blinking to indicate, the NEW LED will become dim until you
reviewed the missed calls.
FLASH key
Press FLASH key to reset the line without leaving the handset.