To adjust handset ringing melodies and volume
The user is able to change the handset ringing for intercom calls and incoming external calls. There are 10
ringer melodies and 5 different volume levels can be set.
1) Press key, then use ∧ or ∨ key to select RING SETUP item. Press key to enter.
2) Press ∧ or ∨ key to select the INT RING and EXT RING setup. Press key to confirm.
3) Press ∧ or ∨ key to select the MELODY and VOLUME setup.
If select MELODY: Press key to confirm. Press ∧ or ∨ key to select desired melody, the
corresponding melody sound can be heard with the selection.
If select VOLUME: Press key to confirm. Press ∧ or ∨ key to select desired ringer volume 1-
5, if you want to switch off select OFF. Press key to confirm your selection.
Notes：
1) If you select ring OFF for INT RING, there will be no icon display on LCD, but when transfer call to this
unit, it will not ring;
2) If you select ring OFF for EXT RING, there will be a ringing off icon display on LCD and when there
is an incoming call, the handset will not ring.(Shortcut key: press and hold key to switch the
handset external call ring on/off)
To set handset tones
1) Press key, then use ∧ or ∨ key to select TONE SETUP item. Press key to enter.
2) Press ∧ or ∨ key to select the KEY TONE and BATTERY LOW, RANGE ALARM setup.
3) Press key to confirm. Press ∧ or ∨ key to select the ON or OFF to enable/disable the
sounding of the beep respectively.
4) Press key to confirm your selection.
Notes:
1) If you turn the key tone on, a beep sound will be heard when a key is pressed on the handset.
2) If you turn the battery low warning tone on, a beep for battery low will be heard when the battery is low.
3) If you turn out of range warning tone on, a beep for range alarm will be heard when the handset is out
of ringed of the base.
To select handset display language
1) Press key, then use ∧ or ∨ key to select LANGUAGE item.
2) Press key to enter.
3) Press ∧ or ∨ key to select the language from ESPAÑOL (Spanish), PORTUGUES (Portuguese),
PYCCKNÑ (Russian), TÜRKÇE (Turkish) ENGLISH (English), DEUTSCH (German),
FRANÇAIS (French) and ITALIANO (Italian). Each language will display in its own native
translation.
4) Press key to confirm your selection.
To change the handset name
1) Press key. Use ∧ or ∨ key to select HS NAME,
2) Press key, the screen will display the current handset name (if has set).
3) Enter the handset name by using numerical key, press R/C to delete if input wrong.
4) Press key to confirm.
To Next Page
Loading...