Daewoo DTD 5500 - Key Functions and Menu Navigation; Redial;Pause Key Usage; Volume Control During Calls; Base Menu Function 1: Phonebook

30
REDIAL/P key
Press RD/P key will insert a time delay of 3.6 seconds in a dialing sequence.
Pick up handset or press key, then press
RD/P
key to dial the last dialed out number.
To change the earpiece or speakerphone volume during a call
While making or answering a call:
1) Press ▲/CID to increase the earpiece or loudspeaker volume, press ▼/OUT to decrease the earpiece
or loudspeaker volume.
2) The display will show the volume level as you adjust it. The earpiece can be adjusted from 1 to 5, and
the loudspeaker can be adjusted from 1 to 6.
Menu Settings
At on-hook state, press the MENU key, to access to the main functions and settings. Press the ▲/CID or
▼/OUT keys to navigate within the Menus. Press MENU key during navigation to enter into a menu or setting
an item. Go back to the previous menu by pressing PHONEBOOK key.
Note: When the unit is powered on initially, the date and time will be blinking, please to set the date
and time first according to use the method of “To set DATE and TIME”
The menu tree as follow:
PHONE BOOK
LIST
NEW ENTRY
EDIT RECORD
DEL RECORD
DELETE ALL
MEM STATUS
CALL LOG
MISSED
RECEIVED
DIALED
SETTINGS
DELETE HS
RING SETUP
INT RING
EXT RING
DIAL MODE
TONE
PULSE
FLASH TIME
100/300/600/1000MS
KEY TONE
ON/OFF
LANGUAGE
8 kinds
DATE&TIME
MODIFY PIN
default 0000
BS DEFAULT
default 0000
REGISTRATION
Base Menu Function 1 : Phonebook
Each individual BASE has its own phonebook, there are 50 phone book memories that can be viewed and
dialed out, each name a maximum of 12 characters, each number a maximum of 20 digits and a melody
selected from 1 to 10. Press
MENU
key to enter and press
▲/CID
or
▼/OUT
key to select
PHONE
PHONEBOOK
. Then press
MENU
key to confirm and enter.