3029
Daewoo Video Cassette Recorder User’s Guide Daewoo Video Cassette Recorder User’s Guide
CM Skip
This is useful for skipping commercials or program
segments.
- Press CM skip once during playback to advance the
tape approximately 30 seconds.
- Each press of the CM skip adds an additional 30
seconds up to 5 minutes.
Display (O.S.D)
Press DISPLAY to display the tape counter, clock and
status mode on the TV screen.
And, by one more pressing DISPLAY before disappearing
the OSD from the screen, only the tape counter will
remain on the screen.
Daylight-Saving Time
1 Press MENU to display the menu.
2 Press 2 to choose Clock Set.
3 Press 2 in the Clock Set mode to toggle the setting
between AUTO DST ON and OFF.
- Select ON if you want the VCR’s clock to
automatically adjust for daylight-saving time.
- Select OFF if you do not want the VCR’s clock to
adjust for daylight-saving time.
Using advanced features,
continued
✔
Use the tape counter to note
the current location of play-
back on the video cassette.
• To reset the tape counter,
press CLEAR and the time
counter will be reset to
00:00 anywhere on a
tape. See “Searching
with the tape counter (go-
to search),” p.28/29 for
more information on this
feature.
✔
SPRING Forward ; Fall
Backward
In the Spring, daylight-saving
time begins on the first Sunday
in April. Because the clock
automatically changes from
2:00 AM to 3:00 AM
(forward one hour), remember
to include the extra hour for
timer recording falling within
this time frame.
In the Autumn, daylight-saving
time ends on the last Sunday in
October.
The VCR clock automatically
changes from 2:00 AM to
1:00 AM (back one hour).
Therefore, it can affect your
recording length.
2 Press 4 to choose Functions.
3 Press 4 to display Go-To Search.
4 The tape counter is displayed on the screen. Input
the tape counter you want to go and press REW or
FF, the VCR will search for the time counter you
want.
Marking a tape for zero search
1 Use PLAY,REW,or FF to reach the point on the tape
that you would like to mark as 0:00:00.
2 Press DISPLAY to display the tape counter on the
screen.
3 Press CLEAR to reset the tape counnter to 0:00:00.
4 You can continue to play the tape or perform other
functions with the VCR.
Child Lock
To disable to usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons
on the VCR or remote won’t work.
- To lock : Press and hold POWER on the remote for
approximately six seconds.
- To release : Press and hold POWER on the remote
for approximately six seconds.
Using advanced features,
continued
To Next Page
Loading...
