3231
Daewoo Video Cassette Recorder User’s Guide Daewoo Video Cassette Recorder User’s Guide
Setting up the VCRs for video cassette duplication
To duplicate a video cassette:
1 Load a blank video cassette tape with the safety tab
intact into the recording VCR. Press INPUT on the
recording VCR.
2 Load a previously recorded cassette into the
playback VCR or camcorder.
3 Press REC/OTR on the recording VCR, then press
P/S.
4 Press PLAY on the playback VCR or camcorder, then
press P/S.
5 Press PLAY on the playback VCR and REC/OTR on the
recording VCR simultaneously to begin the
duplicating process.
Connecting a Audio system to this VCR
!
• It is recommended that the tape
speed be set to the SP mode on
the recording VCR for best
results.
• Unauthorized recording of
copyrighted television programs,
films, video tapes and other
materials may infringe on the
rights of copyright owners and
be contrary to copyright laws.
Using advanced features,
continued
Duplicating video cassettes tape with another VCR
You can duplicate a video cassette tape if you connect a
second VCR to this VCR.
Connecting another VCR to this VCR
Make all connections before turning on the power.
Be sure to press INPUT on the recording VCR.
Connecting a Camcorder to this VCR
For duplicating a previously recorded tape from a cam-
coder, follow the camcorder manufacturer’s instructions.
A type of dubbing hookup is shown below. Be sure to
press INPUT on the recording VCR.
Using advanced features,
continued
To Next Page
Loading...
