VISS (VHS INDEX SEARCH SYSTEM)
AUTOREGISTER
• When recording starts in normal and timer recording,
INDEX MARK is automatically registered on video cassette
tape.
REC • SP
O:00:00
'MARK'
• For a few seconds, on-screen-displayed INDEX MARK will
last.
• INDEX MARK does not appear in OTR.
r_ r'_ r_ O_
(9
--OSD (Recall)
®
Please Note:
1. Index Mark cannot be registered on safety-tabless cassette.
2. A program must be recorded for at least for more than 5 minutes to operate VISS,
3, A cassette tape must be fast forwarded for few seconds when recording from the beginning of cassette tape.
*The beginning of a cassette tape is made of Transport tape, Recording and index marking cannot be done on this
part due to absence of magnectic coating.
INDEXSEARCH
If the cassette is fully recorded, it will rewind automatically to the beginning and the index circuit will search for each
code cue. When it finds one, the VCR shifts automatically into play mode for six seconds so that you can review the
contents of that segment.
Preparation
• Insert a index marked cassette
which is recorded by this VTR
(_ Index Search/Play (_ To Interrupt
• Press SEARCH key on the remote
control. A cassette will be
rewound to the beginning
• "i_e index function will auto-
matically search (The VCR will
play the first 6 seconds at every
index marked segment and will
search again, This process will be
repeated at every index marked
segment to the end of a cassette)
PLAY • SP
O:00:00
INDEX SEARCH
nO1
• To interrupt while playing for 6
seconds to watch, press play key.
PLAy
PLAY • SP
O:00:00
INDEX SEARCH
nO1
31
To Next Page
Loading...
