To Next PageTo Next PageWhat does 'OE DRAIN ERROR' mean on my Daewoo Washer?
If your Daewoo Washer displays the 'OE DRAIN ERROR', the drain hose may be kinked or clogged; clean and straighten it. If the error continues, the drain motor or water level sensor could be faulty and require replacement. It's also possible the valve inlet is activating during draining, or the PCB ASS’Y isn't correctly monitoring the water level, both requiring component replacement.
Why is my Daewoo Washer making a rattling noise?
If your Daewoo Washer is making rattling or clanking noises, there might be foreign objects, such as coins or safety pins, in the drum or pump. Stop the washer and check both the drum and the filter for any such items.
What does 'E2 OVERFLO ERROR' mean on a Daewoo DWD-G1081S?
If your Daewoo Washer displays the error 'E2 OVERFLO ERROR', it indicates that water is continuously being supplied, likely due to a faulty valve inlet that needs replacement. Alternatively, the valve inlet might be working correctly, but the water level sensor is malfunctioning and needs to be replaced. In some cases, the drain motor may not be working, also requiring replacement.
What does 'LE DOOR OP ERROR' mean on my Daewoo Washer?
If your Daewoo Washer displays 'LE DOOR OP ERROR', it means the Start/Hold button was pressed while the door was open; ensure the door is closed. If the error persists, the door lock switch may be defective and need replacement. It's also possible that the PCB ASS’Y is not correctly checking the door lock, requiring its replacement.
General
