3. FUNCTIONS OF THE CONTROL PANEL
4
CONTROL PANEL
Power Switch
• Press this button to turn the power ON or OFF.
Water Level Selector
• This button is used to select the water level you want.
Reservation Button
• If you want to reserve the finishing time of washing, use this button.
As this button is pressed, digit in display increases by 1 hour at one press.
• If current time is 8:00 am and you expect washing will be completed around 5:00 pm, press
this nine times in order to display ‘9’.
Course Selector
• This button is used to select the washing course according to the type of wash loads.
• Either WOOL or SUIT course is adopted to your washing machine.
Program Button
• With this button, you can create new programs by combinations of process.
Temperature Selector (Optional)
• If your washer is connected to two water taps for cold water and hot water, you can select
them. Without operation, cold water would be selected automatically.
Start/Hold
• With this button, you can make your washer proceed your program, or stop temporarilly.
And you can also release the temporary stop by pressing this.
HIGH
MID
FUZZY
LIGHT
HEAVY
SUIT
WASH
ADD
RINSE
SPIN
LOW
HOT
COLD
RES.
DAEWOO AUTOMATIC WASHER
WATER
LEVEL
COURSE
RES.
PROCESS
TEMP
POWER
START
/ HOLD
HIGH
MID
FUZZY
LIGHT
HEAVY
SUIT
WASH
ADD
RINSE
SPIN
LOW
HOT
COLD
RES.
DAEWOO AUTOMATIC WASHER
WATER
LEVEL
COURSE
RES.
PROCESS
TEMP
POWER
START
/ HOLD
Control panel has micom sensor.
As the buttons are pressed, the lamps indicating the selection of your desired washing program will light up.
§§
è
Dwf-5510/5511/6010/6011
§§
è
Dwf-5520/5521/6020/6021
To Next Page
Loading...
