Daewoo DWF-901M - Advanced Washing Operations; Reserved Washing Guide; Partial Process Controls; Spin Only Operation

WASH TIME CONTROL
• As the control button is pressed, wash time will be repeated as
following;
14
➝
18
➝
0
➝
6
➝
10min.
• If you don’t want wash process, you must adjust wash time to 0 min.
RINSE TIMES CONTROL
• As the control button is pressed, Rinse times will be repeated as
following;
1) Pump Model 2 Rinse
➝
3 Rinse
➝
4 Rinse
➝
0 Rinse
➝
1 Rinse
2) Non-Pump Model 2 Rinse
➝
3 Rinse
➝
4 Rinse
➝
1 Spray Rinse
➝
2 Spray Rinse
➝
3 Spray Rinse
➝
4 Spray Rinse
➝
0 Rinse
➝
Rinse
• If you don’t want Rinse process, you must adjust Rinse times to 0 times.
• If you select spray Rinse, the LED of spray Rinse is lighted
(NON-PUMP MODEL)
SPIN TIME CONTROL
• As the control button is pressed, spin time will repeated as following;
5
➝
7
➝
9
➝
0
➝
1
➝
3min.
• If you don’t want spin process, you must adjust spin time to 0 min.
10
Reserved Washing
• Reservation can be made from 2 hours to 48hours.
example) To make reservation to complete washing in 8hours.
• Now the reservation is made.
PARTIAL PROCESS & COMBINATION
POWER
PROCESS
CONTROL
ONLY SPIN
PROCESS
CONTROL
ONLY SPIN
PROCESS
CONTROL
ONLY SPIN
START
HOLD
adjust to
"the SOAK"
close
the lid
"--" SHALL BLINK
START
HOLD
COURSE
REMAIN
RES.
MIN
adjust to "8"
RES
REMAIN
RES.
MIN
CONVINIENT OPERATION FOR SPIN ONLY
• If you want spin only, it is convinient to operate
the button as following.
POWER
START
HOLD
CONTROL
ONLY SPIN