Operation Section
-70-
Service Brake Pedal
Push DOWN on the brake pedal to slow
or stop the lift truck.
RELEASE the brake pedal to allow the lift
truck to move.
Accelerator Pedal
Push DOWN on the pedal to increase
engine rpm (speed).
RELEASE the pedal to decrease engine
rpm (speed).
Parking Brake Lever
Pull the lever BACK to engage the parking
brake.
Push the lever FORWARD to release the
parking brake.
Lift Control
NOTE: To prevent a sudden change of position of
the load, operate all lift, tilt and attachment
controls smoothly.
1. Lower Position - Push the lever
FORWARD smoothly to lower the load.
2. Hold Position - When the lever is
released it will return to the HOLD or
center position. Lifting or lowering action
will stop.
3. Lift Position - Pull the lever BACK
smoothly to lift the load.
To Next Page
Loading...
Need help?
General
