Daewoo RFS-26D1 Series - Ice Maker

35
No
Disassembling procedure
NO
Disassembling procedure
16
38
▷ Disassemble Base F Lamp & PCB housing..
▷Unscrew (1 ea) on side inner left surface
of Box Ice Maker.
▷Remove Cover Bracker on side of Ice Maker.
▷ Pull Forward and Remove Ice Maker AS.
Attention on back side wires.
7-5. Ice Maker
1) Disassembling procedure
27
▷ Remove Window R Lamp
and 2 screws on top inner surface of R room.
▷Disassemble Housing(4ea).
49
▷Remove 4 screw on side of Ice Maker
& top of Line. And remove Bracket I/BOX *T
▷Remove 1 Cable tie on ice sensor.
And remove ice sensor from Ice Maker.
5
▷ Push Lock I/Crusher B and pull forward
Case I/Crusher AS and separate
Case I/Crusher AS from Box I/Maker AS.
* Follow the reverse order when assembling.
CABLE
TIE
SENSOR