DAF LF55 Series Service Manual

ALLISON MD 3060 AUTOMATIC GEARBOX
4-2
©
200508
Removal and installation
8
ΛΦ45/55 series
3
Installing gearbox assembly
1. When installing the gearbox, apply a small
amount of grease to the nose of the torque
converter to prevent noise after fitting. See
"Technical data".
2. Fit the gearbox attachment bolts all around.
Tighten the attachment bolts to the specified
torque. See "Technical data".
3. Install the PTO. Tighten the attachment bolts
to the specified torque. See "Technical data".
4. If necessary, fit the hydraulic pipes and/or
prop shaft. Tighten the attachment bolts to
the specified torque. See "Technical data".
5. Fit the prop shaft.
6. Fit the wiring harness connectors.
7. Fit the external oil pipes. Tighten the pipes to
the specified torque; see "Technical data".
8. If necessary, fit the oil filler pipe.
9. Fill the gearbox with oil and check the oil
level.
W 3 03 100
DAF LF Gearboxes and Clutch Service Manual

DAF LF55 Series Specifications

General

Brand	DAF
Model	LF55 Series
Category	Trucks
Language	English