TECHNICAL DATA
8-2
©
200508
Clutch
0
ΛΦ45/55 series
3
8.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques.
The other threaded connections not specified
must therefore be tightened to the torque
mentioned in the overview of standard tightening
torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Clutch release assembly
MF 362 clutch release assembly attachment bolts 40 Nm
MF 395 clutch release assembly attachment bolts 80 Nm
Tighten attachment bolts as illustrated
1
6
4
72
5
3
8
MF 395
6
8
9
4
25
7
3
1
MF 362
V3 00 414
DAF LF Gearboxes and Clutch Service Manual
To Next Page
Loading...
Need help?
General
