DAF XF95 - Page 116

To Next Page

To Previous Page

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES

5-8

200423

Draining and filling

ΞΦ95 series

Version: 1355(T) 1st axle

Draining the differential

1. Position the vehicle on a level surface.

2. Remove the level check/filler plug (A) and

drain plugs (B) and drain the oil.

3. Fit the drain plugs (B) using the special Torx

wrench (DAF no. 1329493) and tighten the

plug to the specified tightening torque. See

"Technical data".

Filling the differential

1. Fill the differential gear with the specified

quantity of oil. See "Technical data".

2. Check the oil level after approx. 5 minutes, it

should reach up to the level check/filler plug.

3. Fit the level check/filler plug (A) using the

special Torx wrench (DAF no. 1329493) and

tighten the plug to the specified tightening

torque. See "Technical data".

Version: 1355(T) 2nd axle

Draining the differential

1. Position the vehicle on a level surface.

2. Remove the level check/filler plug (A) and

drain plug (B) and drain the oil.

3. Fit the drain plug (B) using the special Torx