DAF XF95 - Page 115

To Next Page

To Previous Page

200423 5-7

Draining and filling

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES

ΞΦ95 series

5.5 DRAINING AND FILLING THE DIFFERENTIAL

To prevent skin injury, avoid

unnecessary contact with the

drained oil.

Version: 1347 axle

Draining the differential

1. Position the vehicle on a level surface.

2. Remove the level check/filler plug (A) and

drain plug (B). Drain the oil.

3. Fit the drain plug (B) using the special Torx

wrench (DAF no. 1329493) and tighten the

plug to the specified tightening torque. See

"Technical data".

Filling the differential

1. Fill the differential gear through the level

check/filler plug (A) with the specified

quantity of oil, see "Technical data".

2. Check the oil level after approx. 5 minutes, it

should reach up to the level check/filler plug.

3. Fit the level check/filler plug (A) using the

special Torx wrench (DAF no. 1329493) and

tighten the plug to the specified tightening

torque. See "Technical data".

Version: 1354 axle

Draining the differential

1. Position the vehicle on a level surface.

2. Remove the level check/filler plug (A) and

drain plug (B). Drain the oil.

3. Fit the plug using the special Torx wrench

(DAF no. 1329493) and tighten the plug to

the specified tightening torque. See