EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
6-6
©
200423
Cleaning
5
ΞΦ95 series
6.4 CLEANING GEARBOX VENT(S)
Cleaning gearbox vent(s)
1. Clean the vent(s) and the surrounding area.
2. Remove the vent(s) from the gearbox.
3. Rinse the vent(s) in a cleaning fluid.
4. Blow the vent(s) dry from the inside using
compressed air.
5. Install the vent(s) on the gearbox.
6.5 CLEANING REAR AXLE VENT
Cleaning rear axle vent
1. Clean the vent and the surrounding area.
2. Remove the vent from the rear axle.
3. Rinse the vent in a cleaning fluid.
4. Blow the vent dry from the inside using
compressed air.
5. Fit the vent to the rear axle.
To Next Page
Loading...
