User's Manual
203
Connection
Configure the settings for the connection parameters.
The connection parameters except Max Connection cannot take effects until the Device has
been restarted.
Table 5-59 Connection parameters
Max Connection
The allowable maximum clients accessing the Device at the same time,
such as WEB, Platform, and Mobile Phone.
Select a value between 1 and 128. The default value setting is 128.
TCP Port
The default value setting is 37777. You can enter the value according to
your actual situation.
UDP Port
The default value setting is 37778. You can enter the value according to
your actual situation.
HTTP Port
The default value setting is 80. You can enter the value according to
your actual situation.
If you enter other value, for example, 70, and then you should enter 70
after the IP address when logging in the Device by browser.
RTSP Port
The default value setting is 554. You can enter the value according to
your actual situation.
POS Port
Data transmission. The value range is from 1 through 65535. The
default value is 38800.
HTTPS Enable Enable
.
HTTPS Port
HTTPS communication port. The default value setting is 443. You can
enter the value according to your actual situation.
Click Apply to complete the settings.
To Next Page
Loading...
Need help?
General
