User's Manual
88
On the PTZ interface, click End to complete the settings.
5.4.3.4 Configuring AutoScan
On the expanded PTZ control panel, click .
The PTZ interface is displayed.
Click the Border tab.
Border tab
Click the direction arrows to position the left and right borders.
5.4.4 Calling PTZ Functions
After you have configured the PTZ settings, you can call the PTZ functions for monitoring from the
expanded PTZ control panel.
Expanded PTZ control panel
5.4.4.1 Calling Presets
On the expanded PTZ control panel, in the No. box, enter the value of the preset that you
want to call.
Click to call the preset.
To Next Page
Loading...
