User's Manual
216
Table 5-68 Alarm center parameters
Enable Enable the alarm center function.
Protocol Type
In the
list, select protocol type. The default is
.
Host IP
The IP address and communication port of the PC installed with alarm
client.
Port
Self-Report Time
In the
list, select time cycle and specific time for
uploading alarm.
Click Apply to complete the settings.
5.14.1.12 Configuring P2P Settings
You can manage the devices by using P2P technology to download the application and register the
devices. For details, see "5.1.4.5 Configuring P2P Settings."
5.14.2 Configuring Network Testing Settings
5.14.2.1 Testing the Network
You can test the network connection status between the Device and other devices.
Select Main Menu > INFO > NETWORK > Test.
To Next Page
Loading...
