Dahua D-PFS4226-24ET-240 - 4 Port Management; Configuring Port

9
4 Port Management
4.1 Configuring Port
Port configuration can be used to configure basic parameters which are related to switch port. The
port parameters will directly affect the working mode of the port. Make configurations according to
the practical requirements.
Step 1 Select
Port Management
>
Port Configuration
on the
System Info
page.
Figure 3-1 Configure port
Step 2 Configure port parameters.
Table 3-1 Description of parameters
Parameter Description
Port Displays the Switch port number.
Description Add description information for port.
Link Displays the port link status.
Enable
Configure port on and off.
●
On: Enable the link.
●
Off: Disable the link.
Speed Duplex Status Displays the status of the port speed.