Dahua D-PFS4226-24ET-240 - Example of Snmpv1;V2 Configuration; Example of Snmpv3 Configuration

32
5.5.3 Example of SNMPv1/v2 Configuration
Background Information
NMS is connected with the Switch, and the following requirements needs to be completed.
●
NMS monitors and manages the Switch through SNMP v1 or SNMP v2.
●
The Switch can actively send Trap messages to the NMS when an error occurs.
Figure 4-18 Example of SNMP v1/v2 configuration
Procedure
Step 1 Select
Device Management
>
SNMP Settings
on the
System Info
page.
Step 2 Select
SNMP Version
to
SNMP v2
, and then set the SNMP port number to 161.
Step 3 Configure
Read Community
,
Write Community
,
Trap Address
and
Trap Port
to public,
private, 192.168.1.2 and 162 separately.
Figure 4-19 SNMPv2 configuration
Step 4 Click
Save
.
5.5.4 Example of SNMPv3 Configuration
Background Information
NMS is connected with the Switch, and the following requirements need to be met.
●
NMS monitors and manages the Switch through SNMPv3.
●
The Switch can automatically send out Trap message to the NMS when there is any malfunction.
●
When NMS connects Agent to SNMP, it requires authentication. The authentication mode is MD5,