23
Figure 4-8 Configure port VLAN
Step 2 Configure parameters.
Table 4-4 Description of parameters
Parameters Description
Port Displays all ports of the Switch.
Port Type Configure the port type, including three types: Access, Trunk and Hybrid.
Default VLAN
Add port to VLAN, all ports belong to VLAN 1 by default. The range is from
1 through 4094.
Egress Tagging
Configure the Egress tag type.
●
Access port: No need to configure.
●
Trunk port:
◇
Untag Port VLAN: Indicates that if the data steam tag is the same as
the PVID (Port-based VLAN ID), the tag will be stripped.
◇
Tag All: Indicates that all data is tagged.
●
Hybrid port:
◇
Tagged Only: Indicates that only tagged data can transmit to this
port.
◇
Untagged Only: Indicates that only untagged data can transmit to
this port.
Allowed VLAN Configure the allowed VLAN.
Step 3 Click
Save
.
To Next Page
Loading...
