User’s Manual
102
5.4.4.4 Calling AutoScan
On the Expanded PTZ Control Panel, in the No. box, enter the value of the border that you
want to call.
Click .
The PTZ camera performs scanning according to the configured borders.
Click again to stop auto scanning.
5.4.4.5 Calling AutoPan
On the Expanded PTZ Control Panel, click to start moving in horizontal direction.
Click again to stop moving.
5.4.4.6 Using AUX Button
On the Expanded PTZ Control Panel, click , the AUX setting page is displayed.
In the Shortcut Aux list, select the option that corresponds to the applied protocol.
In the Aux No. box, enter the number that corresponds to the AUX switch on the decoder.
Auxiliary
5.4.5 Calling OSD Menu
For the coaxial camera, you can call the OSD menu through the Expanded PTZ Control Panel.
On the Expanded PTZ Control Panel, click .
To Next Page
Loading...
Need help?
General