User’s Manual
122
User Name Enter the user name of the remote device.
Password Enter the password of the user for the remote device.
Remote CH No. Enter the remote channel number of the remote device that you want to add.
Decoder Strategy In the
Strategy list, select
,
, or
.
Protocol Type
If the remote device is added through private protocol, the default type
is
.
If the remote device is added through ONVIF protocol, the system
supports
,
,
, or
.
If the remote device is added through other manufacturers, the system
supports
and
.
Encryption
If the remote device is added through ONVIF protocol, enabling the
Encryption
checkbox will provide encryption protection to the data being
transmitted.
To use this function, the HTTPS function should be enabled for the remote IP
camera.
Click OK to save the settings.
Only one device can be added manually at one time.
indicates successful connection and indicates connection failed.
5.6.1.4 Modifying or Deleting Remote Devices
You can modify and delete the added devices.
To modify the remote devices, do the following:
Click or double-click a device.
To Next Page
Loading...
Need help?
General