User’s Manual
198
Intrusion rule
3) Configure the settings for the parameters of drawing rules.
Intrusion parameters
Name Enter the customized rule name.
Action
Configure the actions that are defined as intrusion. You can select the
checkbox and the
checkbox.
Direction
In the
list, select the direction of crossing the configured area.
You can select
,
, and
.
Target Filter
Click to draw areas to filter the target.
You can configure two filtering targets (maximum size and minimum size).
When the target that is crossing the tripwire is smaller than the minimum
size or larger than the maximum size, no alarms will be activated. The
maximum size should be larger than the minimum size.
Effective Target
Enable the AI Recognition function ( ). By default,
and
are selected for alarm object.
4) Drag to draw an area.
5) Click
OK to save the settings.
Click to set the actions to be triggered.
Select the Enable checkbox, and then click Apply.
To Next Page
Loading...
Need help?
General