User’s Manual
315
802.1x
Step 2 Select the Ethernet card you want to certify.
Step 3 Select Enable and configure parameters.
Table 5-63 802.1x parameters
NIC Name
Select a NIC.
Authentication
●
PEAP: protected EAP protocol.
● TLS: Transport Layer Security. Provide privacy and data integrity
between two communications application programs.
CA Certificate
Enable it and click
to import CA certificate from flash drive.
For details about importing and creating a certificate, see 5.19.4.
Username The username shall be authorized at server.
Password Password of the corresponding username.
Step 4 Click Apply to complete the settings.
5.19.2.3 HTTPS
We recommend that you enable HTTPS function to enhance system security.
Step 1 Select
Main Menu > SECURITY > System Service > HTTPS.
To Next Page
Loading...
Need help?
General