Local Configurations 178
5.11.1 SMD
The system processes and analyzes video images, effectively detects persons and vehicles in
the video, and activates alarms. Meanwhile, the system carries out structured storage of the
detection result, to search it quickly in the future.
5.11.1.1 Configuring SMD Settings
Set SMD parameters. When the Device detects information, the system activates alarms.
Select Main Menu > SMART DETECTION > PARAMETERS > SMD. Step 1
The SMD interface is displayed. See Figure 5-140.
Figure 5-140
Select the channel and enable. Step 2
Set parameters. See Figure 5-49. Step 3
Set sensitivity, including high, middle, and low. The higher the
sensitivity is, the bigger alarm probability will be, the bigger false
alarm rate will be. The system selects middle by default.
Select alarm object, including person and vehicle.
Table 5-45
Click Apply to save configuration. Step 4
5.11.1.2 Smart Search
Filter SMD videos that meet criteria and play back the videos.
To Next Page
Loading...