Dahua DH-XVR5216A-X - Page 234

Local Configurations 222
Select Main Menu > NETWORK > EMAIL. Step 1
The EMAIL interface is displayed. See Figure 5-194.
Figure 5-194
Configure the settings for the email parameters. See Table 5-62. Step 2
Parameter
Description
Enable
Enable the email function.
SMTP Server
Enter the address of SMTP server of sender’s email account.
Port
Enter the port value of SMTP server. The default value setting is
25. You can enter the value according to your actual situation.
User Name
Enter the user name and password of sender’s email account.
Password
Anonymity
If enable the anonymity function, you can login as anonymity.
Mail Receiver
In the Mail Receiver list, select the number of receiver that you
want to receive the notification. The Device supports up to three
mail receivers.
Email Address
Enter the email address of mail receiver(s).
Sender
Enter the sender’s email address. It supports maximum three
senders separated by comma.
Title
Enter the email subject.
Supports Chinese, English and Arabic numerals. It supports
maximum 64 characters.
Attachment
Enable the attachment function. When there is an alarm event, the
system can attach snapshots as an attachment to the email.