User’s Manual
9
Manual mode: Set Mode as Static, and fill in Target IP, Subnet Mask and
Gateway, and then the device can automatically acquire IP address from DHCP
server.
Click OK. Step 6
3.1.2.2 Batch Modifying
Click . Step 1
Click Search setting. Step 2
Setting Figure 3-6
Configure device segment, enter user name and password. Click OK. Step 3
The devices searched will be displayed after searching is completed.
Uninitialized devices can be used after initialization.
Select devices whose IP address need to be modified, click . Step 4
Modify IP address Figure 3-7
Select the mode of configuring IP address according to the actual situation. Step 5
To Next Page
Loading...
