User’s Manual
19
2) Select one mode, and drag the left mouse button on the screen to redraw the
matrix, or click on any small matrix, and the system will automatically generate the
matrix based on the mode you selected.
3) After redrawing the matrix, right-click on the redrawn matrix to change the name of
the matrix.
You can also select Custom Info to enter customized information.
4) Configure the parameters of each matrix that you have drawn.
Click Confirm. Step 7
4.4.2 Broadcast Content
You can configure the broadcast content of the Kit, and the content will be broadcast when
vehicle passes.
Select Setup > ITC > Voice Broadcast > Broadcast Content. Step 1
Broadcast content Figure 4-12
Select Front Insert or Back Insert, and then select a voice broadcast item, this item Step 2
will be inserted before or after the item selected (in yellow).
Select Modify, and then click . Step 3
Prefix: The content that will be broadcast before the broadcast item.
Suffix: The content that will be broadcast after the broadcast item.
Modify info Figure 4-13
Click Yes to save the settings. Step 4
Select Delete, and then click to delete a broadcast item. Step 5
To Next Page
Loading...
Need help?
General
