Dahua DHI-VTO2000-A-2-S User Manual

15
3.5.2 Flush-mount
Ref
Name
Ref
Name
1
Wall 2 Plastic Flush-mount Box
3
VTO Unit 4 M4 x 40 Screws
Cut an opening with the size of the mounting box on the wall, and then put the mounting
box in.
Connect the ports on the rear panel to those in the wall. Refer to Section 2.2.2 Access
Control Input and Output Port.
Fix the VTO in the mounting box with the M4×40 screws.
Put sealant between the VTO, mounting box, and the wall.

Dahua DHI-VTO2000-A-2-S Specifications

General

Brand	Dahua
Model	DHI-VTO2000-A-2-S
Category	Intercom System
Language	English