Quick Start Guide
6
Modify IP Address
Select Static mode, and then enter start IP, subnet mask, and gateway.
IP addresses of multiple devices will be set to the same if you select the Same IP check
box.
If DHCP server is available in the network, devices will automatically obtain IP addresses
from DHCP server when you select DHCP.
Click OK.
Logging in to Web Interface
Open IE browser, enter the IP address of the device in the address bar, and then press Enter.
If the setup wizard is displayed, finish the settings as instructed.
Enter the user name and password in the login box, and then click Login.
For the first login, click Click Here to Download Plugin, and then install the plugin as
instructed.
The main interface is displayed when the installation is finished. See Figure 2-4.
Main interface
To Next Page
Loading...
Need help?
General
