Quick Start Guide
9
Press the WPS button on your router, and then press and hold the WPS button on the camera for
1-2 s, the camera would be connected to your router within 1 min.
Press and hold the WPS button on the camera for at least 10 s during proper operation state, and
then the camera would be reset to factory settings.
3.3.3 Attaching Device
Make sure that the mounting surface is strong enough to hold at least three times of the weight
of the device and bracket.
To improve device stability, grounding the device. The grounding hole ( ) is near the cable outlet
hole at the bottom of the device, and the grounding screw size is M3.
Mounting Plate
Fixing mounting plate
When installing the mounting plate, align the arrows on the mounting plate and the positioning
map.
To Next Page
Loading...
Need help?
General
