Figure 5-62
Note
Video diagnosis alarm can trigger PTZ preset, tour, and pattern.
For detailed setups, please refer to chapter 5.8.3.1.1 motion detect for detailed
information.
5.8.3.2 Intelligence (Optional)
The intelligence function is optional. The intelligence function and the
human face detection can not be valid at the same time!
From main menu->Setup->Event->IVS, you can go to the IVS interface. It includes three
interfaces: Tripwire/intrusion/object.
5.8.3.2.1 Tripwire
Note:
The tripwire function is valid once your network camera or your DVR supports this
function.
If your purchased DVR supports the tripwire function, it supports one analog channel.
It is not for the digital channel.
From main menu->Setup->Event->IVS->Tripwire, you can see the following interface. See
Figure 5-63.
System generates an alarm once there is any object crossing the tripwire in the specified
direction.
To Next Page
Loading...
