EasyManua.ls Logo

Dahua HDCVI - 2.3 Connection Sample

Dahua HDCVI
348 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
2.2.6 HCVR42XXA-S3/HCVR4216AN-S3/HCVR52XXA-S3/HCVR5216AN-S
3/HCVR72XXA-S3/HCVR7216AN-S3 Series
The HCVR42XXA-S3/HCVR52XXA-S3/HCVR72XXA-S3 products’ rear panel is shown as
below. See Figure 2-19.
The following figure is based on the HCVR4216A-S3/5216A-S3/7216A-S3 series product.
Figure 2-19
The HCVR4216AN-S3/5216AN-S3/7216AN-S3rear panel is shown as below. See Figure
2-20.
Figure 2-20
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
GND
Alarm input ground port.
2
1~8(16)
Alarm input
port 1~8(16)
There are two types; NO (normal open)/NC
(normal close).
When your alarm input device is using external
power, please make sure the device and the DVR
have the same ground.
NO1~NO3
Alarm output
port 1~3
3 groups of alarm output ports. (Group 1:port
NO1~C1,Group 2:port NO2~C2,Group 3:port
NO3~C3)).Output alarm signal to the alarm
device. Please make sure there is power to the
external alarm device.
NO:Normal open alarm output port.
C:Alarm output public end.
C1~C3

Table of Contents