Dahua ITC231-RF1A-IR - Page 67

Parameter
Function
ICR Switch
ICR switch：
 Auto：Automatically switch according to the brightness
 General：Normal operation
 CPL：Night filter switching equipment
Chart 6-21
6.5.2.1.2 Shutter
The shutter interface is shown as in Figure 6-51 Shutter.
Select Setting>Camera>Attributes>Shutter.
Figure 6-51 Shutter
Please refer to the following sheet for log parameter information.
Parameter
Function
Shutter mode
Support single shutter, picture exposure mode, scene mode, gain mode can be
separately set.
Video Tridim
Denoise
Select ON, to enable 3D NR.
Scene
Switch to other scenes to change sharpness.