Figure 6-59 ONVIF
6.5.3.3 Auto Register
Enable auto register function. When the device connects to WAN, it will reports user position to
specified server periodically, so client software can access device, preview and monitor via server.
Select Setting>Network>Auto Register, see Figure 6-60.
Figure 6-60
Select and enable auto register.
Need to register to server IP address.
Server used to auto register port no.
Auto register device ID allocated by server.
For config, must ensure auto connection to device SN.
Chart 6-26
6.5.3.4 HTTPS
To Next Page
Loading...